Model SDB-V10

  • Inner seat box
  • Practical, robust design
  • Below and behind wood filler
  • Other – bars for maximum airflow
  • Two doors
  • Security lock on each door
  • Different color combinations of corners, fillers, etc. are possible. (on request)
  • All sizes are custom made

Model SDB-V10 — Inner Seat Box

The SDB-V10 is the answer for dog owners who don’t have a traditional car trunk — or whose trunk is too small, too awkward, or already in use. This model is designed to sit inside the car cabin itself, on the back seat or the floor, giving your dog a secure, ventilated space without needing a dedicated luggage area.

Like every SafeDogBox model, the SDB-V10 is built entirely to your measurements. Whether you drive a compact city car, a coupe, or an SUV with fold-down seats, we build the crate to fit your specific interior dimensions.

What Makes the SDB-V10 Different

Most dog crates assume you have a standard estate car or SUV with a usable trunk. The SDB-V10 breaks that assumption. It’s built for the car you actually have.

Two doors — one on each side — make it easy to let your dog in and out regardless of where the crate is positioned inside the car. If you park on the road and can only open one side, or if you want to load your dog from the pavement rather than the road, the two-door design gives you that flexibility.

Features & Specifications

Two Doors — One on Each Side

Unlike trunk models with a single rear door, the SDB-V10 has a door on both the left and right side. Each door has its own independent security lock. This gives you flexibility in how and where you position the crate inside the car.

Bars on All Sides

The SDB-V10 features bar construction on all sides for maximum airflow and ventilation. Your dog has a clear view in every direction and fresh air circulates freely, which is especially important when the crate is positioned inside a car cabin rather than an open trunk.

Security Locks

Each door has its own robust safety lock that cannot be opened accidentally during transit.

Fully Anodized Aluminum Frame

The structural frame is made from fully anodized aluminum — lightweight, strong, corrosion-resistant, and hypoallergenic. The SDB-V10 is easy to move and reposition inside the car as needed.

Custom Color Combinations

The powder-coated iron corners and fasteners are available in different color combinations on request.

Who Is the SDB-V10 For?

The SDB-V10 is the right choice if:

  • Your car doesn’t have a trunk, or the trunk is too small for a standard dog crate
  • You drive a compact car, a coupe, a van, or a vehicle with an unusual rear configuration
  • You regularly carry cargo in the trunk and need the dog crate inside the cabin
  • You prefer to keep your dog closer to you during travel
  • You need access to the crate from both sides of the car

This model also works well for owners who share a car between multiple uses — the inner seat box can be placed and removed easily, and it doesn’t require any permanent fixtures in the car.

Materials We Use

Waterproof plywood — used for the bottom and side panels. No formaldehyde, no sharp edges, easy to wipe clean after muddy paws or wet coats.

Fully anodized aluminum — used for the frame. Lightweight, corrosion-proof, hypoallergenic, and scratch-resistant.

Powder-coated iron — used for all bar structures, corners, and fasteners. Rust-resistant and available in custom colors.

All materials are hypoallergenic and safe for direct contact with your dog.

Frequently Asked Questions

How do I measure for the SDB-V10? Measure the space where you plan to place the crate — the available width, depth, and height inside the cabin. Also measure your dog: length, width when lying down, and standing height. Send both sets of measurements when ordering and we will build the crate to fit.

Is it safe to use inside the cabin? Yes. The SDB-V10 is built to the same structural standards as all SafeDogBox models — rigid aluminum frame, secure locks, no sharp edges. We recommend securing it with a seat belt or anchor strap to prevent movement during sudden braking.

Can it fit in the boot of a small car? It depends on the dimensions of your boot. The SDB-V10 is designed primarily for in-cabin use, but if your boot is an unusual shape, contact us and we will advise which model suits your car best.

Can I remove it easily when I need the back seat space? Yes. The SDB-V10 requires no permanent fixtures. It can be placed and removed as needed.

Does the bar-only construction make it feel less secure for the dog? Some dogs prefer the enclosed feeling of wooden panels. If your dog tends to be anxious, consider whether the SDB-V7 (with wooden sides) might suit them better, or whether the SDB-V10’s positioning inside the cabin — closer to you — provides enough reassurance on its own.

Order Your SDB-V10

Ready to give your dog a safe, comfortable place in your car? The SDB-V10 is available to order through our online shop. Every crate is made by hand in Slovenia, built to your exact measurements, and shipped directly to you.

If you have questions before ordering, use the contact form — we’re happy to help you find the right solution for your specific car and dog.